What effect does reflective film have on cars?
How to paste the car reflective film?
Pasting requirement 1: After pasting the car body reflective logo, it should not affect the performance of the vehicle lighting and signal devices specified in this standard.
Pasting requirement 2: No holes or grooves should be drilled in the car body’s reflective logo.
Pasting requirement 3: The pasted logo needs to be at least 380 mm above the ground.
Pasting requirement 4:
Before pasting, the dust on the surface to be pasted should be wiped clean.
For areas with oil stains and stains, use a soft cloth dipped in a degreasing solvent or a cleaning agent to remove them, and paste them after drying.
In addition, if the car body surface cannot be directly pasted with the car reflective film, the reflective film should be pasted on a strip liner with a certain rigidity, strength, and anti-aging, and then the strip liner should be firmly pasted or riveted to the body.
Why do tow trucks need to be pasted with license plate reflective film?
1. Due to regulations. According to regulations, all trucks and trailers on the road must be pasted with reflective signs as required, and trucks and trailers with a total mass greater than 3.5 tons must be installed with side and rear protection devices as required.
Violators will be warned or fined 200 yuan. The tow truck meets the standard of large trucks, so it is necessary to paste the license plate reflective film.
2. The necessary benefits of reflective film.
It has been observed that traffic accidents are prone to occur when driving at night, and posting reflective film on the car can help avoid rear-end collisions.
Imagine that at night, the vehicle is stationary, or it is anchored on the road. There is no obvious sign when the engine is turned off, and the lights cannot be used.
This allows the car in the distance to see the outline of the car body clearly and avoid hitting it from the rear.
In addition to the above two reasons, we must also consider the characteristics of the tow truck itself.
For example, tow trucks are mainly used for emergency road rescue, and sometimes they have to go to work at night.
When the tow truck is working at night, the reflective stickers on the body of the truck can play a good role in reminding drivers behind to avoid the tow truck from a long distance.
How to identify counterfeit and inferior reflective body logos？
1. Identify based on the reflective effect.
The role of the body reflective logo is mainly reflected at night, so products that do not reflect at night or in a dark environment are counterfeit products.
The identification method is: use a strong flashlight or a small flashlight to check at night or in a dark environment.
The front of the body reflective logo faces the observer, the observation distance is 1m, the flashlight is close to the cheek, the eye is flush, and the flashlight is turned on to illuminate the body reflective logo.
Qualified products should have a strong reflective effect, while those that do not reflect or reflect unclearly are counterfeit products.
This type of counterfeit product mainly includes laser paper products, advertising paper products, etc.
2. Identify based on pattern logos. Counterfeit products often do not have the unique pattern of the body reflective logo.
Even if some counterfeit products have patterns, the patterns are blurred and unclear, and there are no special logos such as CCC compulsory certification marks, factory codes, manufacturer logos, or material grades.
Some products do not have any patterns or logos, which are counterfeit products.
I hope the above information about car reflective film can help you in the future. If you have any questions, please feel free to consult us.
conclusion
Since the light is not good at night, the main purpose of car reflective film is to protect people’s personal safety at night.
However, if you encounter a reflective film of poor quality, it may affect personal safety, so it is necessary for us to understand the identification and production methods of reflective film.
